SFX 1/6 scale Predator WIP 3

Hi everyone, This is the 3rd WIP of this SFX 1/6 scale Predator. After last week most of the paint job has been done. Only it only left the netting on the body and the spots that a Predator’s body has. The netting it hard to draw but after a while you will get used to it LOLZ 🙂 I have still left the dreadlocks not fully done yet. Will post again soon next week once I have the dreadlocks done and washing done 🙂

Photobucket

Without the spots
Photobucket

with spots
Photobucket

Photobucket

Photobucket

Photobucket

Bio Mask on
Photobucket

Photobucket

Photobucket

That all for now 🙂 cya next week 🙂

SFX 1/6 scale Predator WIP 2

Hi everyone. This is the 2nd update for the SFX 1/6 scale Predator. After last week when the toning of the inner flesh body. I have done up the main paint job for the flesh toning final phase and the armor pieces itself. As you all can see. The dreadlocks are carefully masked and painted using low pressure from the compressor to get the correct toning. The Bio Mask has been painted and the inner eye pieces masked and sprayed. Maybe due to the lighting you are not able to see the mesh inside the eye piece. My camera can macro till so close …Haiz… Time to get a better one LOLZ. Now after all these are done. This kit will only left the drawing of the netting on it body and washing it before I can fill it with Plaster and set it on a base for display 🙂 Till then stay tune 🙂

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Till then everyone 🙂 will post my 3rd WIP of this predator soon 🙂

SFX 1/6 scale Predator

Hi everyone 🙂 Been quite some time that I have not done any update. I have recently fallen sick due to flu. Bad flu indeed that make my head goes dizzy and sleepy. But I have fully recovered and are back in action again. This time I have managed to come up with a WIP for building Vinyl kit and the kit I have choose is the SFX 1/6 scale Predator from the Original Predator that feature Arnold 🙂

Ok here goes, After I have managed to clean up all the mold release agent from this kit after washing, I have clean up and cut all the parts at their connector points where I’m going to glue them together after all the paintings has been done. I will do a detail tutorial on how to prep the vinyl kit for painting in a later date and the places that you can get them in Singapore 🙂 So do look forward to it 🙂 Ok here is how it looks like after all the cleaning and cutting 🙂

Photobucket

Photobucket

With flash on as I mostly do all my painting at night. As I’m afraid that the pictures won’t turn out well due to low lighting 🙂
Photobucket

Ok now for the meatier part of the kit itself. Painting. For figure painting there is a few things you will have to take note. It the toning of the body itself and always start from the lighter colour to the darker colours. So always finish the flesh or the most inner parts and work your way out. The black hand paint that you see is the separator that I have created so later after all the flesh toning has been done. I will move to painting the flesh tone and adding the skin dots and netting. After all that is done then I will mask the flesh parts then follow by painting the armor and dreadlocks on the head itself.

Here is how it looks after I have finish toning the body and are ready for the final flesh paint treatments.
Photobucket

Photobucket

Photobucket

Lower body

Photobucket

Arms and legs

Photobucket

Photobucket

Photobucket

Photobucket

Well that all folks 🙂 Do keep a look out for the next WIP 🙂

Anubis GN-X Unit 00

Hi guys.
SMC is holding a GN-X group build which will be display at M-workshop’s annual Scale Modeling Competition Called M’Con. So SMC has gather around 30 modelers from the club to do this mess group build to show our support to local scale modeling community.

These few weeks the weather is very bad, Always raining cats and dogs so finally today I managed to get this little bugger done Finally finish all the painting on this kit. I’m naming it Anubis Gn-X.

As it belongs to the unknown group I think i could add some major differences to the kit itself without taking away the 4 eyes on it face and the X on it body.
For more info on
Some modification is done like adding the horn on the head, Extending the shoulders of the kit to house the extra pair of arms i managed to salvage from my other kits. I have painted the spare arms in bronze colour to signify that the arms unit it more of a extra weapon pack that the Anubis can take upon. Actually during the planning phase I have design a bike/horse look alike from my old kits parts but later i gave up the idea as it makes no sense to have a GN-X ride a horse or bike LOLZ. Also done some detailing to the overall kit itself like the extra exhaust outlet on the internal gn-drive and some other outer armor parts of the kit itself.

If you had notice I had added some semi-hieroglyphs on the major parts of this GN-X itself. The hieroglyphs is not accurate but it just to give it a feel of egyptian itself. I will still have to work on the weathering so the art work will blend in. Another thing to note it after I have managed to fixed the kit up the 1st time after painting. It somehow gave me a feeling it looks like a Armored Core kit LOLZ.

So far this is the update and i will do the panel lines and decals after this weekend as there are the airbrushing course coming up this Sunday 🙂 It gonna be a busy weekend everyone :). So I shall not keep everyone waiting. This is my Anubis GN-X and it going to bear the code number 00

Anubis GN-X
Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Hope everyone like it 🙂

1/6 Scale Female Guyver

Hi everyone. I have been busy working on the mess group build for my friend’s year end Competition called the M’Con. I have gather the members from SMC to start this group build and it will consist of only GN-X 1/144 scale from the Gundam OO series. So while busy with all these I’m also in the mid of completing my BAKUC competition piece. So in the mean time I also took some time out to work on some kits which is not Gunpla related 🙂 I’m used to work on Vinyl and Resin kit before I start Gunpla a long time ago. So in order to prevent myself from burning out from Gunpla I took some time to search for vinyl and resin kits from one of the SMC participant model kit shop and pick up this solid Female Guyver kit. It quite tall and standing 1/6 scale 🙂 It didn’t come with a base so I build a custom base for her to stand 🙂 I will do a more in-depth Work In Progress on my next Vinyl Kit so everyone can have a better understand on how to construct vinyl kits for a change 🙂

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

That all everyone. Now for a simple hint on the next Vinyl kit that I’m going to work on. It comes in silent and invisible….. 🙂 Happy guessing 🙂

MG Force Impulse 90% complete.

Hi everyone. I have finally complete the MG force Impulse Ver K and have done most of the decals beside the back pack as still waiting for the original decals to arrived from Japan. In the mean time do check out the clearer version of the Force Impulse Ver K where I took last weekend at the SMC workshop 🙂

The front view
Photobucket

Side view
Photobucket

Close Up
Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Close up version of Impulse shield
Photobucket

Explode Mode version if Impulse Shield
Photobucket

And Finally the close up of Impulse face 🙂
Photobucket

So till next time when the decals arrived. I will work on my other projects 🙂 Will post more work in progress soon 🙂

MG Force Impulse WIP 3 ( Paint Job Completed )

Hi everyone. My MG Force Impulse is completed. But have yet to start decaling it yet as I’m still waiting for the official Decal to arrived from Bandai which will arrived at August 🙂 So In the mean time do check it out. I guess my Digital camera is getting old and won’t be able handle good clear photos. I think I will have to get the SMC photographer to take a profile of this MG Force Impulse. I will be using this kit as an entry for my good friend Bernard’s M-Con competition as a show of support for his hardwork.

The front of the MS without the Force backpack
Photobucket

Photobucket

Photobucket

The bird eye view
Photobucket

The back of the MS
Photobucket

With weapons mounted and the force shield in closure mode
Photobucket

Shield Expose mode
Photobucket

A close up on my newest badboy
Photobucket

Back pack mounted
Photobucket

Close up…
Photobucket

Anime style side view LOLZ
Photobucket

That is all for now everyone 🙂 Till mt decals arrived from Japan. I shall start working on my recent commission Strike Freedom Full Burst mode. Will post WIP again soon 🙂 In the mean time if you are free do drop by S.M.C workshop on any Sunday to visit me as I’m teaching a few course on scale modeling there 🙂

S.M.C Open House

Hi everyone. The S.M.C (Scale Modeling Club) has fully kicked off her operation on the 13th of July and it was a bang. Lots of modelers from all walks of live attended the open house and there are lots of peoples ranging from all ages who sign up as a SMC member. The whole event lasted from 11am all the way till 5pm. And for the 1st time PA has fully supported the Scale Modeling as a healthy hobby and SMC will do her best to bring this joy to everyone. Also SMC has also launch the 1st scale modeling course that is fully run in the Community Club. It the 1st of her kind and I’m sure there will be more to come. Those who are interested to know more may drop by on every Sunday from 11am till 5pm and pay SMC a visit.

Address
S.M.C
Kampong Glam Community Club
385 Beach Road S’pore 199581
Level 3 on the left of the stairs

Now for the photos 🙂

The Registration Booth for the membership and course. All the working committees are getting ready for the open house to start.
Photobucket

Photobucket

Modelers start coming in and are check out the display cabinets.
Photobucket

Photobucket

Photobucket

The registration booth is getting busy as lots of people is signing up as the SMC member
Photobucket
Photobucket

Photobucket

Photobucket

Some members checking out the display of different model kits we’re building.
Photobucket

The official Beginner scale modeing course banner posted by the CC to created awareness to the public. And there are alot of people who sign up for the course on that very day. If you are interested do give the CC a call for more info.
Photobucket

Flowers which is delivered to me as a gift from my company. I Luv u all man.
Photobucket
Photobucket

I will update everyone more in the future as I’m working very hard on my year end BAKUC Project 🙂

MG Force Impulse Ver K (WIP 2)

This is the 2nd update of my latest MG project Force Impulse. I have done mostly all the modding on the main body and the shield. Will be moving to detail and mod the back pack that comes with the Impulse. Do keep a look out for the WIP 3 coming next week 🙂 And the head is up too but without the V-fin LOLZ

The front view of the Impulse
Photobucket

The side of the Impulse with the shield
Photobucket

The back view of the Impulse
Photobucket